Colour Television
34PT5633
Instructions for use
3139 125 26952
3
FUNCTIONS OF TV CONTROLS/SOCKETS
1
2
Mains Power button
Switch mains power on or off.
Standby light indicator
Indicate red light when standby mode is
activated.
PHILIPS
3
Remote Sensor
A
Aim remote control handset at remote
sensor when operating the TV.
2
1
3
4
5
Volume +/ – button
Adjust sound volume louder/softer.
P (Programme) + / – button
Select channel in ascending/descending order.
Note
•
•
You can enter the main menu by pressing both
the Volume + / – buttons at the same time.
Press Programme + / – button to select
sub-menu.
4
5
A
K
K
L
L
•
Press Volume + / – button to activate sub-menu.
P
6
AV3 in sockets
Connect to Output sockets of VCR/laser disc
player to the AV3 in sockets to playback
programmes.
7
8
9
Headphone socket
Connect headphone jack to socket for
personal listening.
S-VIDEO
9
6
Antenna socket
Connect the aerial plug to the antenna socket
on the backcover.
VIDEO
in
L
AUDIO
R
➠
S-Video In socket
n
7
Connect the S-VIDEO Output socket (if available)
of the VCR to the S-VIDEO in socket to enhance
picture quality.
10 AV1 In sockets
Connect the Output sockets of the VCR/laser disc
to the AV1 in sockets to playback programmes.
11 AV2 In sockets
Connect the Output sockets of the VCR/laser disc
to the AV2 in sockets to playback programmes.
S-VIDEO
9
12 Monitor out sockets
Connect the VIDEO out socket of the TV to the
Input socket of VCR to record programmes.
To enhance sound of your TV, connect the
AUDIO L and R sockets to an external audio
system.
VIDEO
L
AUDIO
R
in
AV1
in
AV2
out
Monitor
8
10
11
12
4
FUNCTIONS OF REMOTE CONTROL
1
SLEEPTIMER
Allows you to select a time period after which the set
will switch to standby mode automatically. You can
set the timer in steps of 15 minutes from OFF mode
up to a maximum of 120 minutes.
1
2
3
4
5
2
A/CH
n
v
o
r
2
3
PIP ON/OFF
Switch on or PIP (Picture in Picture).
PIP UP PIP DOWN
p
A/CH (ALTERNATE CHANNEL)
Alternate between last viewed channel and present
channel.
2
5
8
0
1
3
6
4
4
5
PIP SWAP
9
7
Interchange channel on main screen and subscreen.
SMART
SMART
6
7
8
9
±
`
PIP SOURCE
Allows you to select various external connection for
PIP.
MENU
SURF
6
7
SMART SOUND
Allows you to select 4 types of sound settings
10
11
MENU
Allows you to adjust picture and sound settings and
activate the features and install the channels
automatically.
H
CH
A
AV
12
13
m
4
\
8
9
CURSOR UP
Allows you to select the sub-menus.
CURSOR LEFT
Allows you to access or adjust the sub-menus.
INC. SURR.
INCREDIBLE
`
14
15
10 VOLUME +
Increases volume.
11 VOLUME –
Decreases volume.
GAME
12 AV
Selects AV1, S-VID1, AV2, AV3, S-VID3 and the last
viewed channel respectively. The correct channel
must be selected when viewing a playback
programme.
13 OSD (On-Screen Display)
Displays :
–
–
–
–
–
channel number.
remaining time of the sleeptimer.
programme name.
information line
transmission mode.
14 INCREDIBLE SURROUND
Allows you to select incredible surround sound
when transmission is in stereo mode.
151GAME
Allows you to select Video mode as input for video
games.
5
FUNCTIONS OF REMOTE CONTROL
16 POWER
Switch set off temporarily to standby mode.
(The red light indicator lights up when set is on
standby mode). To switch on set from standby
mode, press and hold button for a few seconds.
16
2
17
A/CH
n
v
o
r
18
PIP UP PIP DOWN
17 PIP POSITION
p
19
20
Allows you to move the PIP screen to your
desired position.
18 PIP FREEZE
2
5
8
0
1
3
6
21
4
Allows you to freeze or resume the PIP screen.
9
19 PIP DOWN
7
SMART
SMART
Selects a PIP channel in descending order.
±
`
22
23
20 PIP UP
MENU
SURF
Selects a PIP channel in ascending order.
21 DIGIT (0 - 9)
24
25
Allows you select a channel. For a 2- digit
channel number, the second digit must be
entered before the “ – “ sign disappears
26
H
CH
A
22 SMART PICTURE
27
28
Allows you to select 4 types of picture settings.
AV
m
4
\
23 SURF
Allows you to select up to a maximum of 10
channels and view quickly the selected channels.
29
24 CURSOR RIGHT
INC. SURR.
INCREDIBLE
30
Allows you to access or adjust the sub-menus.
`
GAME
25 CURSOR DOWN
Allows you to select the sub-menus.
26 CHANNEL + / –
Allows you to select channel in ascending or
descending order.
27 MUTE
Mutes sound. To restore sound, press button
again.
28 TIMER
Not applicable.
29 4
Allows you to switch from Stereo to Mono
sound (stereo transmission) or to choose
between language5 and language 6.
30 INCREDIBLE PICTURE
Allows you to view a more vivid and realistic
picture with better contrast when the “ON”
function is selected.
6
ACCESSING THE MAIN MENU
The main menu allows you access to the PICTURE, SOUND, FEATURES and INSTALL
menus.
How to call up the main menu
MENU
SURF
PICTURE
SOUND
LANGUAGE
AUTO PROGRAM
TUNER
FEATURES
Ñ
INSTALL
➠
CHANNEL EDIT
FINE TUNE
1. Press the MENU button.
2. The main menu appears on the screen.
How to access the menus in the main menu
The 4 buttons (CURSOR DOWN, UP, LEFT and RIGHT) allow you to select the desired
menu, make adjustments and access the sub-menus.
MENU
SURF
MENU
SURF
MENU
SURF
MENU
SURF
➠
➠
How to exit from the menus
m
MENU
Press the
(OSD) button to exit menu from screen or press
(MENU) button
repeatedly to exit all menus from screen..
7
AUTOMATIC TUNING OF TV CHANNELS
How to tune in the channels automatically (Auto Store)
Press button
Result on TV Screen
Enter main menu .
MENU
PICTURE
SOUND
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
FINE TUNE
2
FEATURES
Ñ
INSTALL
Press button repeatedly
until INSTALL is selected.
A/CH
n
v
o
r
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
INSTALL
Enter install menu.
4
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
FINE TUNE
Ñ ENGLISH
Press
button the
9
7
second time to enter
language mode.
SMART
SMART
±
`
MENU
SURF
Select desired language
– ENGLISH or
OR
(HANGUL).
H
CH
A
INSTALL
Go back to install
menu.
Press button repeatedly
to select TUNER.
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
FINE TUNE
AV
m
4
\
Ñ
ANTENNA
Press
button to
INC. SURR.
INCREDIBLE
enter TUNER mode.
`
INSTALL
GAME
Select ANTENNA or
CABLE mode.
LANGUAGE
AUTO PROGRAM
TUNER
Ñ
CABLE
OR
CHANNEL EDIT
FINE TUNE
INSTALL
Go back install menu.
LANGUAGE
AUTO PROGRAM
Ñ
TUNER
CHANNEL EDIT
FINE TUNE
Select AUTO PROGRAM.
INSTALL
AUTO PROGRAM
TUNER
CHANNEL
ANTENNA
2
Start automatic tuning.
Note : To interrupt
tuning, press MENU
button.
PLEASE WAIT
Ñ
INSTALL
LANGUAGE
AUTO PROGRAM
Ñ
TUNER
CHANNEL EDIT
FINE TUNE
Exit menu from screen
once automatic tuning
is completed.
m
EDITING OF CHANNELS
8
This feature allows you to skip channels which have bad or weak TV signal or channels that
you do not watch often.
Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or –
button. You can only call up the channel by the DIGIT (0 -9) button.
How to edit channels
Press button
Result on TV Screen
MENU
Enter main menu
PICTURE
SOUND
2
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
FINE TUNE
A/CH
FEATURES
INSTALL
n
v
o
r
Ñ
PIP UP PIP DOWN
p
Press button repeatedly until
INSTALL is selected.
2
5
8
0
1
3
6
4
INSTALL
Enter INSTALL menu
9
7
LANGUAGE
SMART
SMART
±
`
AUTO PROGRAM
TUNER
Press button repeatedly until
CHANNEL EDIT is selected.
Ñ CHANNEL EDIT
FINE TUNE
CHANNEL
ADDED
MENU
SURF
INSTALL
CHANNEL EDIT
H
CH
A
Enter CHANNEL EDIT menu.
AV
m
4
\
Ñ CHANNEL
ADDED
8
1
4
2
5
8
0
3
6
Key in desired channel
to be edited.
7
9
SMART
`
SMART
INC. SURR.
INCREDIBLE
±
`
INSTALL
GAME
CHANNEL EDIT
Select ADDED.
CHANNEL
ADDED
8
Ñ
INSTALL
CHANNEL EDIT
Activate edit mode.
CHANNEL
DELETED
8
Ñ
Exit menu from screen.
m
How to add back channels
MENU
• Enter main menu by the
(MENU) button.
• Press
button repeatedly until INSTALL is selected.
• Enter INSTALL menu by the
button.
• Press
button repeatedly until CHANNEL EDIT is selected.
button.
• Enter CHANNEL EDIT menu by the
• Key in the channel to be added by the DIGIT (0 - 9) button.
• Press button to select DELETED.
• Press
button to activate edit mode to add back channel.
m
• Exit menu from screen by the
(OSD) button.
9
FINE TUNING OF TV CHANNELS
How to do fine tuning
This feature allows you to adjust the picture reception in area of weak reception.
Press Button
Result on TV Screen
1
4
2
5
8
0
3
6
Select the channel you
want to fine-tune.
8
7
9
SMART
SMART
2
±
`
A/CH
n
v
o
r
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
4
9
7
SMART
SMART
±
`
Enter main menu.
MENU
PICTURE
SOUND
LANGUAGE
AUTO PROGRAM
TUNER
MENU
SURF
FEATURES
INSTALL
Ñ
CHANNEL EDIT
FINE TUNE
Press button repeatedly
until INSTALL is selected.
H
CH
A
AV
m
4
\
INSTALL
Enter INSTALL menu.
AUTO PROGRAM
TUNER
CHANNEL EDIT
FINE TUNE
NAME
INC. SURR.
INCREDIBLE
`
CHANNEL 8
Ñ
GAME
Press button repeatedly
until FINE TUNE is selected.
Start fine-tuning until
desired picture and sound
is obtained.
Store last fine-tuned
status and exit menu
from screen.
m
1 0
NAMING OF CHANNELS
This feature allows a selection of 50 preset names for all channels. It also allows
you to enter a new name or modify an existing name of a channel.
How to name channels
Press button
Result on TV Screen
Enter main menu.
MENU
PICTURE
SOUND
LANGUAGE
FEATURES
INSTALL
AUTO PROGRAM
TUNER
2
Ñ
Press button repeatedly
until INSTALL is selected.
CHANNEL EDIT
FINE TUNE
A/CH
n
v
o
r
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
4
INSTALL
Enter INSTALL menu
9
7
AUTO PROGRAM
TUNER
SMART
SMART
±
`
CHANNEL EDIT
FINE TUNE
NAME
Press button repeatedly
until NAME is selected.
MENU
SURF
Ñ
2
H
CH
A
INSTALL
Enter name mode.
Select preset name.
2
AUTO PROGRAM
TUNER
AV
m
4
\
CHANNEL EDIT
FINE TUNE
NAME
Ñ
PERSONAL
OR
INC. SURR.
INCREDIBLE
`
GAME
INSTALL
If you select PERSONAL,
move to first character
slot.
AUTO PROGRAM
TUNER
CHANNEL EDIT
FINE TUNE
NAME
Ñ
Ñ
Key in selected character.
Move to next character
slot and key in the next
INSTALL
AUTO PROGRAM
TUNER
CHANNEL EDIT
OR
character by the
button.
You can key up to a
maximum of 4 characters.
FINE TUNE
Ñ
NAME
2 LUCK
Store name.
MENU
Exit menu from screen.
m
1 1
PICTURE AND SOUND ADJUSTMENTS
The picture and sound menu allows you to make adjustments to the picture and
volume level.
MENU
1
Press
(MENU) button to enter main menu.
2
Use the
(CURSOR UP) or (DOWN) buttons to select the PICTURE or SOUND
menu and the
(CURSOR LEFT) or
(RIGHT) buttons to make adjustments
or access the sub-menus.
3
Press
m
(OSD) button to exit all menus from screen.
Picture menu item
Brightness
Colour
Selection
PICTURE
Ñ
33 BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
TINT
COLOUR TEMP
Increase/decrease
Increase/decrease
Increase/decrease
Increase/decrease
Increase/decrease
÷
Contrast
Sharpness
Tint
Colour temp.
Choice of 3 colour tones
(Normal, Warm or Cool)
Sound menu item
Treble
Selection
SOUND
Ñ
Increase/decrease
Increase/decrease
Increase/decrease
On/Off
38 TREBLE
BASS
BALANCE
AVL
÷
Bass
Balance
AVL
*
*AVL (Auto Volume Leveller)
Auto Volume leveller adjusts volume level automatically to a standard level when you
experience sudden change in volume during commercial break or channel switching
due to the variation in signal conditions.
1 2
FEATURES (LOCK FEATURE)
The FEATURES menu allows you access to the LOCK, MESSAGE, DNR (Dynamic
Noise Reduction) and PIP (Picture-in-Picture) features.
LOCK feature allows parents to lock channels to prevent their children from watching
programes they deem undesirable.
How to lock channels
Press button
Result on TV Screen
Enter main menu .
MENU
PICTURE
2
SOUND
FEATURES
INSTALL
Ñ
CHILD LOCK
MESSAGE
DNR
A/CH
n
v
o
r
Press button repeatedly
until FEATURES is
selected.
PIP UP PIP DOWN
p
PIP
2
5
8
0
1
3
6
4
FEATURES
9
7
SMART
SMART
Enter FEATURES menu
Ñ
±
`
CHILD LOCK
MESSAGE
DNR
BLOCK CHANNEL
SETUP CODE
MENU
SURF
PIP
Enter CHILD LOCK menu.
FEATURES
CHILD LOCK
H
CH
A
Ñ
BLOCKCHANNEL
SETUP CODE
AV
m
4
\
INC. SURR.
INCREDIBLE
Enter the BLOCK CHANNEL
menu.
FEATURES
CHILD LOCK
`
GAME
BLOCK CHANNEL
1
4
2
5
8
0
3
6
Enter the current access
code. Note : Current access
code is 0711.
ENTER CURRENT
ACCESS CODE
7
9
SMART
SMART
±
`
FEATURES
CHILD LOCK
BLOCK CHANNEL
CHANNEL 8
ALLOWED
SELECT CHANNEL
PRESS ÉTO BLOCK
VIEWING
1
4
2
5
8
0
3
6
If access code is correctly
entered, select channel
to block viewing.
7
9
SMART
`
SMART
±
FEATURES
CHILD LOCK
BLOCK CHANNEL
CHANNEL 8
Activate the block mode.
BLOCKED
SELECT CHANNEL
PRESS ÑTO UN-BLOCK
VIEWING
1 3
...... FEATURES (LOCK FEATURE)
How to view locked channels
Press button
Result on TV Screen
1
4
2
5
8
0
3
6
Eenter the current access
code.
CHANNEL 8
BLOCKED BY CHILD LOCK
– – – –
7
9
SMART
`
SMART
2
±
Note : Current access code
is 0711.
A/CH
n
v
o
r
PLEASE ENTER ACCESS CODE
OR SELECT ANOTHER CHANNEL
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
4
9
7
SMART
SMART
±
`
If access code is correctly
entered, all channels can
be viewed until TV is
switched off.
MENU
SURF
ALL CHANNELS
CAN BE VIEWED
UNTIL TV IS
SWITCHED OFF
H
CH
A
You can proceed to view
all the channels by the
AV
m
4
\
CHANNEL + / – or
DIGIT (0 -9) buttons.
INC. SURR.
INCREDIBLE
`
GAME
...... FEATURES (LOCK FEATURE)
1 4
How to unlock channels
Press button
Result on TV Screen
Enter main menu .
MENU
PICTURE
SOUND
2
Ñ
FEATURES
INSTALL
CHILD LOCK
MESSAGE
DNR
A/CH
n
v
o
r
Press button repeatedly
until FEATURES is
selected.
PIP UP PIP DOWN
PIP
p
2
5
8
0
1
3
6
FEATURES
4
Enter FEATURES menu
9
7
SMART
SMART
Ñ
CHILD LOCK
MESSAGE
DNR
BLOCK CHANNEL
SETUP CODE
±
`
MENU
SURF
PIP
FEATURES
CHILD LOCK
Enter CHILD LOCK menu.
H
CH
A
Ñ
BLOCK CHANNEL
SETUP CODE
AV
m
4
\
FEATURES
CHILD LOCK
Enter the BLOCK CHANNEL
menu.
INC. SURR.
INCREDIBLE
BLOCK CHANNEL
`
GAME
1
4
2
5
8
0
3
6
Enter the current access
code.
ENTER CURRENT
ACCESS CODE
7
9
SMART
`
SMART
±
FEATURES
CHILD LOCK
1
4
2
5
8
0
3
If access code is correctly
entered, select channel
to be unblocked.
6
BLOCK CHANNEL
CHANNEL 8
BLOCKED
SELECT CHANNEL
PRESS ÑTO UN-BLOCK
VIEWING
7
9
SMART
`
SMART
±
FEATURES
CHILD LOCK
Activate the unblock mode.
Exit menu from screen.
BLOCK CHANNEL
CHANNEL 8
ALLOWED
SELECT CHANNEL
PRESS ÉTO BLOCK
VIEWING
m
1 5
FEATURES ( LOCK FEATURE)
How to change current access code
Press button
Result on TV Screen
Enter main menu .
PICTURE
SOUND
MENU
Ñ
2
FEATURES
INSTALL
CHILD LOCK
MESSAGE
DNR
A/CH
n
v
o
r
Press button repeatedly
until FEATURES is
selected.
PIP UP PIP DOWN
PIP
p
2
5
8
0
1
3
6
4
FEATURES
Enter FEATURES menu
9
7
SMART
SMART
Ñ
`
CHILD LOCK
MESSAGE
DNR
BLOCK CHANNEL
SETUP CODE
±
MENU
SURF
PIP
Enter CHILD LOCK menu.
FEATURES
CHILD LOCK
H
CH
A
Ñ
BLOCK CHANNEL
SETUP CODE
AV
m
4
\
FEATURES
CHILD LOCK
Select SETUP CODE.
INC. SURR.
INCREDIBLE
`
GAME
BLOCK CHANNEL
SETUP CODE
Ñ
Enter SETUP CODE menu.
FEATURES
CHILD LOCK
SETUP CODE
1
4
2
5
8
0
3
6
Enter current access code.
If access code is incorrectly
7
9
SMART
`
SMART
±
ENTER CURRENT
ACCESS CODE
entered, press
to erase code.
button
FEATURES
CHILD LOCK
SETUP CODE
1
2
3
6
Once the current access
code is correctly entered,
it will prompt you to enter
the new access code.
4
5
8
0
7
9
SMART
`
SMART
±
ENTER NEW
ACCESS CODE
FEATURES
CHILD LOCK
SETUP CODE
CHANNEL 8
ALLOWED
Note : It is advisable to
note down the new code
somewhere where you
can refer to in case you
have forgotten about it.
SELECT CHANNEL
PRESS ÉTO BLOCK
VIEWING
Exit menu from screen.
m
1 6
FEATURES (MESSAGE FEATURE)
Message feature
This feature allows you to key in a message. The message will be displayed on the
screen when the set is switched on. When the set is on standby mode, the standby
light indicator will start flashing indicating there is a message.
Note : For message to disappear from screen, press MENU button on the remote
control.
How to use the message feature
Press button
Result on TV Screen
Enter main menu.
MENU
PICTURE
SOUND
2
Ñ
FEATURES
INSTALL
CHILD LOCK
MESSAGE
DNR
Press button repeatedly
until FEATURES is selected.
A/CH
n
v
o
r
PIP UP PIP DOWN
PIP
p
2
5
8
0
1
3
6
FEATURES
4
Enter FEATURES menu.
9
7
SMART
SMART
CHILD LOCK
Select MESSAGE.
Ñ MESSAGE
DNR
LINE 1
LINE 2
CLEAR
±
`
MENU
SURF
P[IP
FEATURES
MESSAGE
Enter MESSAGE menu.
Press
button again
H
CH
A
Ñ
to enter message line.
CLEAR
AV
m
4
\
Key in alphabet or number
to be displayed at the
current position. To move to
next character position,
FEATURES
MESSAGE
INC. SURR.
INCREDIBLE
OR
Ñ
`
G
GAME
press
button.
CLEAR
If there is not enough space
to fill in the whole message,
MENU
press
button to go back
message menu followed by
button to select the next message
line (LINE 2). Press
button
to enter message line and continue
keying of message.
Activate message. The message
will only be displayed on the screen
after the set is switched off and
on again.
MENU
Note: If you want to clear the whole
message, select CLEAR in the
message menu and press
button to delete message.
m
Exit menu from screen.
1 7
FEATURES (DYNAMIC NOISE REDUCTION / INCREDIBLE PICTURE)
Dynamic Noise Reduction
This feature allows you to improve the “noisy” picture (“snow” or little dots on the
picture) resulting in a clearer and sharper picture.
Press button
Result on TV Screen
Enter main menu.
PICTURE
SOUND
MENU
2
Ñ
FEATURES
INSTALL
CHILD LOCK
MESSAGE
DNR
A/CH
n
v
o
r
PIP UP PIP DOWN
PIP
p
Press button repeatedly
until FEATURES is selected.
2
5
8
0
1
3
6
4
9
7
SMART
SMART
±
`
MENU
SURF
FEATURES
Enter FEATURES menu.
CHILD LOCK
MESSAGE
DNR
PIP
Ñ
OFF
H
CH
A
Press button repeatedly
until DNR is selected.
AV
m
4
\
INC. SURR.
INCREDIBLE
`
GAME
Enter DNR mode.
FEATURES
Select ON mode to
activate Dynamic Noise
Reduction function.
CHILD LOCK
MESSAGE
DNR
Ñ
ON
OR
PIP
Exit menu from screen.
m
1 8
FEATURES (PICTURE-IN-PICTURE)
Picture In Picture feature allows you to call up a subscreen within your main screen
which enable you to watch two channels at the same time.
How to start PIP function
• Switch on PIP mode.
8
2
(A normal size PIP
screen appears)
A/CH
n
v
o
r
P UP PIP DOWN
p
• Press button second
time to change normal
size PIP screen to a
smaller size.
8
• Press button the third
time to switch off PIP
screen.
How to select PIP Source
AV3
• Press button repeatedly
to cycle through the various
external connection and select
the desired PIP source
2
AV2
5
S-VID1
A/CH
n
o
r
5
PIP UP PIP DOWN
p
v
(AV1, S-VID1, AV2 AV3, S-VID3).
• You can also press PIP UP and
PIP DOWN buttons to select the
desired PIP source.
2
A/CH
n
v
o
r
PIP UP PIP DOWN
p
How to freeze the PIP screen
• Press button once to freeze
the PIP screen.
Freeze
PIP
AV1
2
Freezing the PIP screen allows
you to view a programme in
the still mode. For example,
you may want to write down
some informationfrom the PIP
screen, freezing the screen will
allow you time to do so before
the moving picture changes.
A/CH
n
o
r
PIP UP PIP DOWN
p
v
Unfreeze
PIP
V1
• Press the button the second
time to unfreeze the PIP screen.
1 9
FEATURES (PICTURE-IN-PICTURE)
How to position the PIP screen
• Press button to move PIP screen
to your desired position.
2
A/CH
n
v
o
r
PIP UP PIWN
p
5
How to swap PIP screen with
the television screen
8
2
A/CH
n
v
o
r
• Press button to interchange the PIP
screen and the television screen
8
PIP UP PIP DOWN
p
How to adjust PIP picture settings
You can adjust COLOUR and TINT settings through the PIP menu.
Press button
Result on TV
Enter main menu.
MENU
PICTURE
SOUND
2
Ñ
FEATURES
INSTALL
CHILD LOCK
MESSAGE
DNR
A/CH
n
v
o
r
PIP UP PIP DOWN
Press button repeatedly
until FEATURES is selected.
p
PIP
2
5
8
0
1
3
6
4
Enter the FEATURES
menu
PICTURE
9
7
CHILD LOCK
MESSAGE
DNR
SMART
SMART
±
`
COLOUR
TINT
Press button repeatedly
Ñ
PIP
MENU
SURF
until PIP is selected.
FEATURES
PIP
Enter the PIP menu.
H
CH
A
AV
m
4
\
28 COLOUR
TINT
Adjust COLOUR setting.
INC. SURR.
INCREDIBLE
`
If you want to adjust
tint setting, select
TINT.
FEATURES
PIP
GAME
COLOUR
23 TINT
Adjust TINT setting.
Exit menu from screen.
m
2 0
USING THE SURF FEATURE
This feature allows you to select up to a maximum of 10 channels and view quickly
the selected channels.
How to add a channel to the surf list
Press button
Result on TV Screen
1
1
4
2
5
8
0
3
6
SURF
8
Key in the channel number
you want to add to the surf
list.
7
9
SMART
`
SMART
2
±
THE SURF LIST
IS EMPTY
A/CH
n
v
o
r
PIP UP PIP DOWN
p
SURF
Enter the SURF menu.
PRESS ˙ TO ADD
2
5
8
0
1
3
6
4
SURF
8
9
7
Add selected channel to the
surf list. Repeat the above 2
steps to add more channels
to the surf list.
SMART
SMART
±
`
MENU
SURF
PRESS ˙ TO DELETE
Exit menu from screen.
m
H
CH
A
AV
m
4
\
How to delete a channel from the surf list
1
Enter the SURF menu.
SURF
SURF
INC. SURR.
INCREDIBLE
8
3
6
9
7
`
GAME
Press button repeatedly to
cycle through the surf list
and select the channel you
want to delete.
SURF
PRESS ˙ TO DELETE
SURF
3
6
9
7
Delete selected channel from
the surf list. Repeat the above
steps if you want delete more
channels fom the surf list.
PRESS ˙ TO DELETE
Exit menu from screen.
m
How to activate SMART SURF
SURF
Press button repeatedly to
cycle through the selected
channels in the surf list and
select the channel you want
to view
8
3
6
9
7
SURF
PRESS ˙ TO DELETE
2 1
STEREO / SAP / MONO / INCREDIBLE SURROUND
Stereo/Mono/SAP
•
Press 4 button to select
STEREO or MONO when
programme is transmitted
in Stereo mode
AV
m
4
\
STEREO
INC. SURR.
INCREDIBLE
MONO
`
GAME
OR
select STEREO, SAP or
MONO when programme
is transmitted in SAP
(Second Audio Programme)
mode.
STEREO
SAP
MONO
Incredible Surround
•
Press INCR. SURR.
AV
m
4
\
(Incredible Surround)
button to select STEREO
or INCREDIBLE SURROUND
when transmission is in
Stereo mode or playing
back stereo programmes
via AV mode
STEREO
INC. SURR.
INCREDIBLE
`
GAME
INCREDIBLE SURROUND
OR
select SPATIAL or MONO
whe n transmission is in
MONO
Mono mode.
SPATIAL
2 2
SMART CONTROLS
Smart Picture
Smart Picture offers you a choice of 4 picture settings – PERSONAL, RICH, NATURAL
and SOFT.
SMART
SMART
±
`
0
PERSONAL
RICH
MENU
SURF
➠
NATURAL
• Press SMART (Picture) button repeatedly to cycle
through the 4 settings to select your desired mode.
SOFT
Definition of Picture Settings
PERSONAL : Picture settings are set to your preference.
RICH
: Emphasize very vibrant colours.
(Suitable for AV mode in brightly-lit room)
NATURAL : Emphasize original colours.
SOFT : Emphasize “warm” colours. (Suitable for dimly-lit
room condition and gives cinema-like effect when
light is switched off)
Smart Sound
Smart Sound offers you a choice of 4 settings – THEATRE, MUSIC, VOICE and
PERSONAL.
SMART
SMART
±
`
0
THEATRE
MENU
SURF
➠
PERSONAL
VOICE
• Press SMART (Sound) button repeatedly to cycle
through the 4 settings to select your desired mode.
MUSIC
Definition of Sound Settings
THEATRE
: Emphasize sensation to action.
(Bass and Treble boosted)
PERSONAL : Sound settings are set to your preference.
VOICE
MUSIC
: Emphasize high tone. (Treble boosted)
: Emphasize low tone. (Bass boosted)
2 3
CONNECTING PERIPHERAL EQUIPMENT
Recording programmes from the TV to VCR
• Connect VIDEO out sockets of the TV to the Input sockets of VCR to record programmes.
To enhance the sound of your television, connect the AUDIO L and R sockets to an
external audio system instead of to the VCR. For mono equipment, connect only the
AUDIO L (left) socket.
S-VIDEO
V
L
VIDEO
L
AUDIO
R
R
L
L
in
in
out
AV1
AV2
Monitor
R
R
V
L
R
Back of VCR
video in
audio in
External audio system
Playback programmes from VCR/Laser disc player to the TV
• Connect the S-VIDEO Output socket (if available) of the VCR to the S-VIDEO in socket to
enhance the picture quality.
Note : You should not connect the VIDEO in socket of the TV if S-VIDEO in socket is used.
• Connect the Output sockets of the VCR/laser disc player to the AUDIO L and R in sockets
to playback programmes.
S-VIDEO
VIDEO
L
L
AUDIO
R
R
in
in
out
AV1
AV2
Monitor
Back of VCR
L
R
2 4
GENERAL INFORMATION/TIPS
Safety
Disconnect mains plug when :
– the RED light below the screen is flashing continuously.
– a bright white line is displayed across the screen.
– cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp
chamois leather.
– there is a lightning storm.
– the set is left unattended for an extended period of time.
Caution : Never attempt to repair a defective TV yourself. Always consult a skilled
service personnel.
Switch off your TV overnight via the POWER ON/OFF button instead of leaving it
on standby. You save energy and at the same time demagnetise the picture tube.
A demagnetised picture tube supports good picture quality. When the set is
switched on, do not shift, move or turn (e.g. on a swivel base) the set around
because an uneveness in colour in some parts of the screen may occur.This can be
eliminated by switching off the set by the mains power button . Wait for 20
minutes before switching on again. If symptom still exists, call service.
Before calling service
Symptom
Check/Action
Colour patch
(uneveness)
• Switch off TV by the mains power button. Wait for
20 minutes before switching on again.
No power
• Check TV's AC power cord is plugged into mains
socket. If there is still no power, disconnect plug.
Wait for 60 seconds and re-insert plug. Switch on
TV again.
No picture
• Check antenna connection at rear of the TV.
• Possible faulty TV station. Try another channel.
• Increase the contrast setting first and then the
brightness setting.
Good picture but no sound
• Try increasing the volume.
• Check whether sound is switched on.
Good sound but poor or
abnormal colour or no picture
• Increase the contrast setting first and then the
brightness setting.
Snowish picture and noise
Horizontal dotted lines
• Check antenna connection at rear of the TV.
• Possible electrical interference( e.g. hairdryer,
nearby neon lights, etc). Switch off equipment.
'Ghosts' or double image
• Possible poor positioning of antenna. Using a
highly directional antenna may improve reception.
TV not responding to remote • Check life span of batteries.
control handset • Aim remote control handset directly at remote
control sensor lens on the TV set.
2 5
SPECIFICATIONS
34PT5633
Picture Tube Size
Picture Tube Visible Area
84 cm
80 cm
Audio Output
2 x 5 W + 10 W
NTSC M
TV System
Playback
NTSC M
Stereo Sound Transmission
Korean Stereo
Set Dimensions
Length
Depth
88 cm
57 cm
69 cm
Height
Nett Weight of Set
52 kg
Note
For Operating Voltage, Frequency, Power Consumption and Version
Number, refer to the type sticker at the rear of the set.
|
IBM THINKCENTER 8194 User Manual
Intel Computer Hardware 273561 003 User Manual
KitchenAid KGCS166GBT2 User Manual
Kyocera 1155 User Manual
Maretron ACM100 User Manual
MSi 865PEM2 User Manual
Optimus 16 132 User Manual
Philips Brilliance 181AS User Manual
Philips Business 107B10 User Manual
Philips DVP3388K User Manual